Traq Guitars
Traq Guitars
  • Видео 25
  • Просмотров 647 550
Making of "Bohemian Rhapsody Recreated"
Some fun facts from the making of "Bohemian Rhapsody Recreated" - a full re-recording of all the vocal and instrument tracks of Bohemian Rhapsody done by @janektraczykofficial and myself. The full video can be found here: ruclips.net/video/v4BVT4UB2X4/видео.html
related videos:
How to play the Bohemian Rhapsody Solo: ruclips.net/video/BQLEpekogSw/видео.html
The guitar tone from the solo: ruclips.net/video/irmwmoGp5aA/видео.html
Просмотров: 845

Видео

How to play the Bohemian Rhapsody solo (if you're not Brian May)
Просмотров 1,9 тыс.3 года назад
In this video I walk you through the Bohemian Rhapsody solo phrase by phrase, focusing on the nuances and little details that I think are key in getting the right feel. Recreating Bohemian Rhapsody (full cover): ruclips.net/video/v4BVT4UB2X4/видео.html How to get the Bohemian Rhapsody guitar tone: ruclips.net/video/irmwmoGp5aA/видео.html Like: TraqGuitars
Can a bad string make a good guitar play out-of-tune?
Просмотров 3993 года назад
A short video about the kinds of surprises you might get when putting cheap strings on a guitar. I didn't expect anything like this. traqguitars
Guitar Swirl: Gulf-inspired Washburn N1
Просмотров 1,7 тыс.3 года назад
Swirling a Washburn N1 body with a color scheme inspired by the Gulf racing livery. Done with Magic Marble paints. traqguitars
Testing a nylon-string guitar with distortion
Просмотров 59 тыс.4 года назад
How do nylon strings sound with distortion? ...is a question I got a few times under my solidbody nylon string guitar demo video. So here is the answer. Like: TraqGuitars Original nylon string guitar demo: ruclips.net/video/KnPLf0TakdM/видео.html
How to sound like Brian May part 2: Amp and pickup comparison
Просмотров 8 тыс.6 лет назад
Recreating step-by-step the guitar tone in the guitar solo from Bohemian Rhapsody by Queen. In this video I compare what happens if we use the correct pickup combination with different amp simulations, or the closest amp simulation with different pickup combinations. TraqGuitars
How to sound like Brian May: reproducing the Bohemian Rhapsody solo tone
Просмотров 58 тыс.6 лет назад
Recreating step-by-step the guitar tone in the solo from Bohemian Rhapsody by Queen. NEW!! How to play the solo: ruclips.net/video/BQLEpekogSw/видео.html Full cover of Bohemian Rhapsody - all tracks recreated from scratch: ruclips.net/video/v4BVT4UB2X4/видео.html TraqGuitars Impulse files used in the video: www.dropbox.com/s/vs2lxya9n0fypdj/TraqGuitars_Bohemian_impulses.zip?dl=0 al...
Guitar demo: "Strat Thru"
Просмотров 11 тыс.6 лет назад
A multiscale 7-string strat-shaped guitar with a high A string. traqguitars In the video I talk a little about the story behind the guitar and demonstrate the tones possible with the 3x single coil system with series wiring. Guitar specs: pine(?) salvage body, (mostly) ovangkol neck section (almost) thru body. Merlin "classic strat" pickups. Blue swirl finish.
How to: Swirl guitar finish with Magic Marble paints
Просмотров 369 тыс.6 лет назад
Swirling a stratocaster-shaped guitar with Magic Marble paints in black/blue/silver. Clearcoated with 2k automotive clear. I'm showing the process and giving some tips on how to get it right. traqguitars
Building a guitar. Part 13/13: Finishing and assembly
Просмотров 8 тыс.7 лет назад
Budowa gitary elektrycznej krok po kroku. Część trzynasta zamyka cykl - gitara jest lakierowana, montujemy osprzęt, szlifujemy progi i oglądamy (i słuchamy) co z tego wszystkiego wyszło. traqguitars
Building a guitar. Part 12/13: Finishing up woodwork
Просмотров 6 тыс.7 лет назад
Budowa gitary elektrycznej krok po kroku. W części dwunastej wiercimy i frezujemy ostatnie otwory, montujemy elektronikę i przeprowadzamy pierwszy test gitary. traqguitars
Building a guitar. Part 11/13: Body meets neck
Просмотров 6 тыс.7 лет назад
Budowa gitary elektrycznej krok po kroku. W części jedenastej robimy sporo rzeczy: profil gryfu, logo na główkę, klejenie gryfu i korpusu.. traqguitars
Building a guitar. Part 10/13: Color
Просмотров 9 тыс.7 лет назад
Budowa gitary elektrycznej krok po kroku. W części dziesiątej zaczyna się zabawa: barwimy drewno na niebiesko-zielony kolor. traqguitars
Building a guitar. Part 9/13: Frets
Просмотров 6 тыс.7 лет назад
Budowa gitary elektrycznej krok po kroku. W części dziewiątej wreszcie w podstrunnicy pojawiają się progi. traqguitars
Building a guitar. Part 8/13: Fingerboard markers
Просмотров 6 тыс.7 лет назад
Budowa gitary elektrycznej krok po kroku. W części ósmej dodajemy markery na podstrunnicy i przygotowujemy podwierzchnię na przyjęcie progów. traqguitars
Building a guitar. Part 7/13: The neck pocket
Просмотров 5 тыс.7 лет назад
Building a guitar. Part 7/13: The neck pocket
Building a guitar. Part 6/13: Gluing the fingerboard
Просмотров 6 тыс.7 лет назад
Building a guitar. Part 6/13: Gluing the fingerboard
Building a guitar. Part 5/13: Preparing the fingerboard
Просмотров 6 тыс.7 лет назад
Building a guitar. Part 5/13: Preparing the fingerboard
Building a guitar. Part 4/13: Gluing the neck II
Просмотров 7 тыс.7 лет назад
Building a guitar. Part 4/13: Gluing the neck II
Building a guitar. Part 3/13: Gluing the neck I
Просмотров 9 тыс.7 лет назад
Building a guitar. Part 3/13: Gluing the neck I
Building a guitar. Part 2/13: Body
Просмотров 15 тыс.7 лет назад
Building a guitar. Part 2/13: Body
Building a guitar. Part 1/13: Design
Просмотров 5 тыс.7 лет назад
Building a guitar. Part 1/13: Design
Guitar demo: "Etna"
Просмотров 1,1 тыс.8 лет назад
Guitar demo: "Etna"
Guitar demo "Nylon One"
Просмотров 42 тыс.10 лет назад
Guitar demo "Nylon One"
Guitar demo: "The Druid"
Просмотров 1,6 тыс.10 лет назад
Guitar demo: "The Druid"

Комментарии

  • @arturartur991
    @arturartur991 День назад

    poland?

  • @christineblack4654
    @christineblack4654 3 дня назад

    man if I would have lots more money I would have you make me a swirl dip guitar. :)

  • @christineblack4654
    @christineblack4654 3 дня назад

    dude I love your swirl dip videos and your playing here. Great tones you know your shit, that guitar is as gorgeous as the others. wowww killer guitars. subbed and belled for sure.

  • @christineblack4654
    @christineblack4654 3 дня назад

    wowwww!

  • @montauta
    @montauta Месяц назад

    It's a shame the pickguard cover the 50%of the front😅😅

  • @airenaishen
    @airenaishen Месяц назад

    Wonderful playing and beautiful sounds @TraqGuitars! Btw can the nylon string electric produce feedback with distortion?

  • @omerefe8955
    @omerefe8955 Месяц назад

    That sound is nuts I think with the correct effects this guitar would be a perfect instrument for a sludge band

  • @Jenny-kg7zb
    @Jenny-kg7zb Месяц назад

    I love the nylon with distortion!

  • @timzeien
    @timzeien Месяц назад

    A couple questions… How long do you need to keep your guitar under the water? Also when I’ve taken objects out of the water little water bubbles remain. How do you get rid of those? Hairdryer ..fan? Any other technique? Just shaking didn’t seem to do it. Relying on sanding afterwards doesn’t really work since it sands off the color.

    • @TraqGuitars
      @TraqGuitars Месяц назад

      I don't really think you need to keep the guitar under water for any set time, the water is just a medium to transfer the paint onto the body, that's it. Now getting the paint to be absolutely smooth after taking the body out is actually quite tricky. A combination of hairdryer/paper towell can make the surface reasonably clean so that you don't pick anything up on the way out, but the Magic Marble paint that I'm using tends to form a little clumps here and there no matter what I do. And as you say - level sanding won't work since the color layer is so thin you're guaranteed to sand through. The only way I figured out that actually works is to wait until you have enough clearcoat on and then level sand that - you'll go throught the clear where the color formed a clump, but the clear will keep you from sanding through the color at that point. And once you've done that, the body is prefectly level and just needs a few more layers of clear before the final sanding and polshing

    • @timzeien
      @timzeien Месяц назад

      Got it. Thx.

  • @KejikAlois
    @KejikAlois Месяц назад

    Hello, honestly, I haven't even seen the worse sides, but I like the guitar with nylon strings, because I have stronger fingers, I need to know how wide the zero fret is, what the price of the guitar is and where it sits to buy, I don't know any of this even though I went through all your information. I would like an electric guitar with a zero fret width of 48 to 50mm with nylon strings, but you can also advise me with metal strings, please politely thank you Kejík

  • @KejikAlois
    @KejikAlois Месяц назад

    Hello, honestly, I haven't even seen the worse sides, but I like the guitar with nylon strings, because I have stronger fingers, I need to know how wide the zero fret is, what the price of the guitar is and where it sits to buy, I don't know any of this even though I went through all your information. I would like an electric guitar with a zero fret width of 48 to 50mm with nylon strings, but you can also advise me with metal strings, please politely thank you Kejík

  • @garypring2658
    @garypring2658 Месяц назад

    THE GUITAR NEED TO BE A RED SPECIAL THAT SOUND LIKE THE ORIGINAL JUST YOU KNOW THE CHORDS SO SOUND LIKE SIR DR BRAIN MAY

  • @equinox747
    @equinox747 Месяц назад

    what paint do you use ?

    • @TraqGuitars
      @TraqGuitars Месяц назад

      "Magic marble", sometimes sold simply as marbling paint

  • @luzmarieladelgado1378
    @luzmarieladelgado1378 Месяц назад

    This is just Wonderful!, thanks. Now, I have a doubt... what kind of marble paints are you using?, can I try with whatever is available, even the ones offered for kids painting?

    • @TraqGuitars
      @TraqGuitars Месяц назад

      the "magic marble" brand that I used appears to be made by C.KREUL, there's another one by Marabu that I tried and that works similarily

  • @yansmut
    @yansmut 2 месяца назад

    I'm surprised that this actually works. And the fact that it also sounds good is simply shocking.

  • @christianurgese
    @christianurgese 2 месяца назад

    Thank you

  • @scarystardust6095
    @scarystardust6095 3 месяца назад

    ⭐⭐⭐⭐⭐🏴󠁧󠁢󠁳󠁣󠁴󠁿

  • @DewieStewart
    @DewieStewart 3 месяца назад

    What paint did you use for the chrome color? I really want to make sure the paints are compatible with that so I don't get any bad results. Thanks!

    • @TraqGuitars
      @TraqGuitars 3 месяца назад

      I haven't really had problems with putting Magic Marble over stuff. Here the silver is typical hardware store acrylic automotive paint. Compatibility can be an issue once you go to covering the swirl with clearcoat. You definitely need to do some tests on scrap for that

  • @MichaelA-pi4nm
    @MichaelA-pi4nm 3 месяца назад

    Thanks. Your nylon electric sounds wonderful. I just picked up a Godin Multiac nylon and I asked myself that exact question. To me, it makes the nylon string sound virtually the same as a steel string, so really no point. Great demo - wish more were like yours.

  • @PedroSantos-fw6gk
    @PedroSantos-fw6gk 3 месяца назад

    I wonder how it would sound, if it would sound similar, if you put regular strings on it

    • @TraqGuitars
      @TraqGuitars 2 месяца назад

      well at that point it would sound like an electric guitar with a piezo pickup. I use that configuration to get an "acoustic guitar" sound from a solidbody electric without having to switch guitars in the middle of a song for example. Like here: ruclips.net/video/3utV2GZkPZg/видео.htmlsi=2JBsqUWsadpf0En7&t=207 With distortion it sounds similar to a magnetic pickup, but - in short - less "full" in the mids since piezo pickups have much more high end and that drowns out the mids.

  • @robertsmolinski8685
    @robertsmolinski8685 3 месяца назад

    Far out..

  • @shakaz6641
    @shakaz6641 3 месяца назад

    How durable is this as...

    • @TraqGuitars
      @TraqGuitars 2 месяца назад

      by itself it's not very durable, the color layer is very thin. You have to put clearcoat on top, and then the durability depends on the clearcoat. If you put automotive 2-part clear the durability is going to be the same as car paint essentially

  • @nullises9697
    @nullises9697 3 месяца назад

    IMHO electronic nylon is so much better so far

  • @hashachache
    @hashachache 4 месяца назад

    I prefer the nylon 4:43

  • @zbychu1381
    @zbychu1381 4 месяца назад

    Jak dla mnie na nylonach ciekawsze brzmienie

  • @reallyonfire
    @reallyonfire 4 месяца назад

    What did you use to plug the holes?

    • @TraqGuitars
      @TraqGuitars 2 месяца назад

      I think it was just simply candle wax

  • @BlommaBaumbart
    @BlommaBaumbart 4 месяца назад

    If it's too much for the amp, maybe it would benefit from a bass combo like from Phil Jones Bass.

  • @simonsantiago1028
    @simonsantiago1028 4 месяца назад

    Will plain acrylic paints work as well?

    • @TraqGuitars
      @TraqGuitars 2 месяца назад

      not like this, with different paint you'd need to put something in the water to make them float, or do some other tricks.

  • @johndextersantos9541
    @johndextersantos9541 4 месяца назад

    I want it so much i'd pick it up from the screen 🤣

  • @josemauriciovaldezalas1192
    @josemauriciovaldezalas1192 4 месяца назад

    Excellent 👍

  • @pfanni1451
    @pfanni1451 4 месяца назад

    Very helpful hints and your design is killer ! Thank you !

  • @vndrevlves
    @vndrevlves 4 месяца назад

    Best video ever on the subject! Thank you for all the hardwork!

  • @andressepulveda9709
    @andressepulveda9709 4 месяца назад

    Why always ad Reverb

  • @simaocarlos6592
    @simaocarlos6592 5 месяцев назад

    Wonderfull job man!!! 😮 Have you a type if paint and name? Thanks

  • @bogeholdtguitars
    @bogeholdtguitars 5 месяцев назад

    How much paint did you use

  • @mixmixture7049
    @mixmixture7049 5 месяцев назад

    You still get gain on 6 to 4 string. 3 to 1 lose the gain😂

  • @maizjsj
    @maizjsj 6 месяцев назад

    The tapping technique on the nylon guitar was heavenly, but the lower notes are definitely something-- they felt really crunchy at times, and I ADORE THAT, but at some other times it felt really muddy. That bass is really weird hahahah What would it be like if you went with steel strings for the 4th, 5th abd 6th string?

  • @scottishbawbag315
    @scottishbawbag315 6 месяцев назад

    Did u use borax, also what was water temp.

  • @codycreager4428
    @codycreager4428 7 месяцев назад

    Pinch harmonics on nylon suck but everything else sounds pretty damn good

  • @vercaveverca1715
    @vercaveverca1715 7 месяцев назад

    SUPER

  • @johnmaye748
    @johnmaye748 7 месяцев назад

    Always that n string sucks when you have good string and they get worn out you would think it's the high e but nope always the b can't be fully in tune when the string goes bad, affects chords more then anything

  • @darkoazure9902
    @darkoazure9902 7 месяцев назад

    Rewelka

  • @kebman
    @kebman 7 месяцев назад

    you used metal on both!!1111111

  • @NeverWolf
    @NeverWolf 8 месяцев назад

    just play dat bitty into a bass amp, silly!

  • @mrshadow5132
    @mrshadow5132 8 месяцев назад

    Can i play all of genres just using an Nylon eletric guitar with distortion, without the eletric?

  • @gobbledeegouup6578
    @gobbledeegouup6578 8 месяцев назад

    I love the sound of nylon one plugged in no distrotion a little bit of reverb sounded funky and great. Wow like realy funky sound.

  • @DaffierPig6843
    @DaffierPig6843 8 месяцев назад

    Sounds spot on

  • @17kigen1978
    @17kigen1978 8 месяцев назад

    Fachura Pasjonat Grunt to robić to co się kocha 👍❤

  • @ricasonis1574
    @ricasonis1574 9 месяцев назад

    hi, but actually your guitar is a Midi. You don't use piezo. right?

  • @davidrussell8783
    @davidrussell8783 9 месяцев назад

    Remarkable comparison. I never knew nylon could ... rock.